Metal Forming

 

 

 

 

 

Associate Professor, born in 1973, an uzbek with higher education Berdyev D.M.

 

 

Berdiev D.M., having graduated from the Mechanics and Machine-Building Department of TSTU, worked in 1997-2002 as an assistant at the department "Foundry-production machines and technologies", from 2002-2006 he worked as a manager. From 2006-2007 he was a senior lecturer at the Department of Materials Science and Technology of New Metals, from 2007-2009 he was a senior lecturer at the Department of Metal Technology and Materials Science, from 2009-2011 he was Associate Professor at the Department of Technology Metals and materials science ", since 2011-2013 years deputy. Dean of the Mechanical Engineering Faculty, from 2013-2016 Dean of the Mechanics and Machine-Building Faculty.

"Metal Forming" Since 2016 head of the department working on today.

On September 8, 2007 at the specialized council of 06.06.07.03. At TSTU, defending the thesis for a master's degree in "Metal Science and Heat Treatment of Metals" on the topic "Increasing the resistance of steels to wear during friction with unstressed abrasive materials by thermal hardening" 05.16.01 received a Ph.D. In 2011 the Higher Attestation Commission under the Cabinet of Ministers of the Republic of Uzbekistan was given the scientific title of Associate Professor.

Phone: +99894-648-1225

Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Time of reception: Monday-Friday from 14-00

Information on the teaching staff of the Department "Metal Forming"

 

 

 

Berdiev Dorob Murodovich Candidate of Technical Sciences, Associate Professor Head of the department

 

 

 

Tilabov Bakhodir Kurbonovich Candidate of Technical Sciences, Associate Professor

 

 

 

Makhmudova Nargiza Abdunabievna Senior Lecturer

 

 

 

Yusupov Abdulaziz Abdullajanovich Assistant

 

 

 

 

Akhmadaliev Shokhrukh Shuhratovich Assistant

 

             History of the Department "Metal Forming"

The department "Processing of engineering materials" was founded in 1979 and then it was headed by Ph.D. Assoc. Usmonov, and later prof. Abdullaev F.S. In 2007, the department "Processing of engineering materials" was established on the basis of the department "Foundry-production machines and technologies" and the department "Processing of metals by pressure". From 2007-2012, the head of the department "Processing of engineering materials" was Ph.D. Assoc. Turakhodzhayev ND, and from 2012 until May 2, 2016 the department was headed by Ph.D. Assoc. Khalimdzhanov Т.S.

On the basis of Presidential Decree 2524 on the modernization of the TSTU from 02.05.2016, the department "Processing of metals by pressure" is separately organized from the department "Machining of engineering materials." From 01.07.2016 the department is headed by Ph.D. Assoc. Berdiev D.M.

General information about the department "Metal Forming"

 

To date, the department "Processing of metals pressure" in the main state there are 5 teachers. Head of the Department Ph.D. Assoc. Berdiev Dorob Murodovich, Ph.D. Assoc. Tilabov Bakhadyr Tilabovich, senior teacher Makhmudov Nargiza Abdunabievna, assistant Yusupov Abdulaziz Abdullazhonovich, assistant Ahmadaliyev Shahrukh Shukhratovich.

 

There are no bachelor's directions at the department.

 

The master has a specialty 5A310305 - "Rolling production of ferrous and non-ferrous metals" and 5A320208 - "Metal Forming" and they are taught by qualified teachers.

Students - Department of bachelors 5320200 - at the direction of "Technology of mechanical engineering, automation and mechanical engineering equipment manufacturing" (metal forming) are taught the following subjects:

         1. Fundamentals of the theory of metal forming

         2. Forging and stamping equipment

         3. Technology of stamping sheet materials

         4. Fundamentals of design of dies and stampings

         5. Equipment and technological processes in the course of plastic deformation

        

For undergraduates:

1. Mathematical modeling of pressure treatment processes

2. Stamping in cold state

3. Plastic deformation

4. Process automation Metal Forming

5. Progressive technological processes of volumetric punching

6. Production technology rolled

7. Technological equipment for the production of rolled products

Scientific methodical operation Department "Metal Forming"

Ilmiy asarni nomi

Jurnal, to‘plam (yil, nomer, betlari), nashriyot yoki mualliflik guvoxnomasi nomeri

Hammualiflar familyasi

1

2

4

6

1

Повышение износостойкости детали почвообрабатывающих машин их термообработкой

Композиционные материалы. Узбекский научно-технический и производственный журнал. №2. 2012. С. 23-25. Ташкент. Издательство Уз РНТК «Фан ва тараккиёт».

Muxamedov A.A.

2

Выбор материала деталей рабочих органов

o‘zbekiston   qishlok   ho‘jaligi.  Agrar – iqtisodiy, ilmiy – ommabop jurnal.  №10. 2012.  b. 33.

 

3

Выбор сталей и технологий упрочнения для деталей рабочих органов почвообрабатывающих машин

Konchilik xabarlari. O‘zbekiston ilmiy-texnik va ishlab chiqarish jurnal. №30. 2012. S.85-88.

Pardaeva G.T.

4

Выбор сталей и технология их термического упрочнения с помощью компьютерной программы

Техника и технология. № 1. 2014 г.

Muxamedov A.A.

С. 24-26. Россия. Москва.

Издательство «Компания Спутник+»

5

Лазерно-дуговая закалка углеродистых сталей

UzPEK-5

V.V.Gavrilenko, T. Usmanov,

28-30.10.2014. г. Ташкент.

I.A. Xusanov

6

Повышение абразивной износостойкости стали с термической обработкой

Вестник,  №4. 2015. С. 135-137, ТашГТУ, Ташкент.

Pardaeva G.T.

7

Влияние на износостойкость параметров структуры закаленных низкоотпущенных сталей

Композиционные материалы. Узбекский научно-технический и производственный журнал. №4. 2016. С. 31-33. Ташкент. Издательство Уз РНТК «Фан ва тараккиёт».

Muxamedov A.A.

8

Po‘latlar mexanik xossasini oshirishda zamonaviy kompyuterlarni o‘rni

«mashinasozlikda zamonaviy materiallar, texnika va texnologiyalar» Xalqaro ilmiy-texnikaviy anjuman. Ilmiy makolalar to‘plami, Andijon 2016.  S. 473-476.

 

9

Влияние параметров структуры сталей на их абразивную износостойкость

«mashinasozlikda texnik texnologiyasi:  holati va kelgusi taraqqiyoti» Respublika ilmiy-texnikaviy anjuman. Ilmiy makolalar to‘plami, Toshkent 2016. 

Abduraimov S

10

Qizdirish qurilmalari

O‘quv qo‘llanma

-

Toshkent. ToshDTU, 2013 y.104 b.

11

Qizdirish qurilmalari

Laboratoriya va amaliy mashgulotlarni bajarish uchun uslubiy ko‘llanma. Toshkent sh. 2012

Shokirov SH.

12

Qizdirish qurilmalari

Kurs loyixasini  bajarish uchun

-

uslubiy  kullanma. Toshkent. ToshDTU, 2012.

 

13

Машиностроительные материалы

Laboratoriya mashg‘ulotlarni bajarish uchun uslubiy ko‘llanma. Toshkent sh. 2016

Pardaeva G.T.,

Karimov SH.A.

 

List of articles published by the department "Metal Forming" for 2016-2017 academic year

 

1) Кафедра мудири, т.ф.н., доц. Бердиев Дороб Муродович - Тошкент давлат техника университетида 2017 йил 17-20 апрель кунлари бўлиб ўтадиган талабаларнинг “Фан ва техника тараққиётида интеллектуал ёшларнинг ўрни” мавзусидаги республика илмий анжуманида:

1. “Методика проведения анализа автоматизации и определения контактных напряжений при прокатке”;

2. “Влияние сверхпластической деформации на эксплуатационные свойства сталей”;

3. “Влияние механических свойств армко-железной структуры материала, на температуру и скорость деформации”;

4. “Анализ моделей технологического проектирования прокатки” мавзулари билан илмий мақолаларчоп этилди.

2) Россия федерациясининг Омск шаҳрида 2017 йил 20-21 апрель кунлари талабаларнинг “Техника и технологии машиностроения” мавзусида VI халқаро илмий-амалий конференцияда:

1. “Определение контактных напряжений при прокатке”;

2. “Влияние механических свойств сталей температура нагрева и скорость деформации”;

3. “Повышение абразивной износостойкости сталей” мавзулари билан илмий мақолалар чоп этилди.

2) Кафедра катта ўқитувчиси Махмудова Наргиза Абдунабиевна:

1. “Молодой учёный” халқаро илмий журналида “Новые технологии в теории дрессовки”;

2. “Инновация – 2016” илмий анжуманида “Инновационные технологии в методике и последовательности экспериментального исследования”мавзулари билан илмий мақолалар чоп этилди.

3)Кафедра ассистенти Юсупов Абдулазиз Абдуллажанович:

1. “Молодой учёный” халқаро илмий журналида “Испытание материалов локальным деформированием”;

2. “European Science Review”халқаро илмий журналда“Manufacturing technology carbide roller inlet box crate № 25 using refractory metal powders”;

3. “Профессор-ўқитувчи ва илмий тадқиқотчиларнинг даврий мақолалар тўплами” да “Экспериментальная установка ротационной прошивки” ҳамда “Силовые параметры ротационной вытяжки и расчет технологических параметров отбортовки” мавзулари билан илмий мақолалар чоп этилди.

4) Кафедра ассистенти Ахмадалиев Шохрух Шухратович:

1. Тошкент темир йўл ва мухандислик институтининг “Вестник журнали” да “Заготовкадеформациясини тахлил қилишнинг энергетик усули”;

2. Тошкент давлат техника университетининг “Профессор-ўқитувчиларнинг илмий ишлар тўплами” да “Прокатлашда деформацион мустахкамланиш” мавзулари билан илмий мақолалар чоп этилди.

List of companies cooperating with the Department "Metal Forming" in the scientific and practical directions

 

1. СП ОАО “MARTENSIT INVESTMENT”

 

2. Трубная Металлургическая Компания

 

3. Бекобод техника-иқтисодиёт касб-ҳунар коллежи

 

4. Бекобод шаҳар саноат касб-ҳунар коллежи

 

5. СП “Ташкентский трубный завод”

 

6. “Қўқон механика заводи” АЖ

 

7. “Ўзметкомбинат” АЖ

 

8. “Олмалиқ тоғ-кон металлургия комбинати” АЖ

 

 

 

 

 

 

 

 

Contact us

2, Universty street, Tashkent, 100095, Uzbekistan

 Phone: +998712464600

Fax: +998712271032

E-mail: tstu_info@tdtu.uz

JoomShaper