Design principia’s of machines

 

 

Managinging department

 

 

 

The candidate of technical sciences Mirzayev Kahramon Karshibayevich. Was born in 1977.

Phone (8371) 229-26-01; cellural (90)947-14-58

Electronic address e-mail: qahramon1977@umail.uz

 

History of the department

 

kenaf and rice shavings in detail of the machines. The specified subjects were developed in commonwealth with ГОСНИИМАШ; the plant "Ташсельмаш" and "Ташкенткабель".

       As a result of performing the research work on given problem are created new material on base of the use agricultural waste. Introduction result study data gives the enormous economic effect. Creation component cog-wheel allowed to reduce the noise in transmission and gives spare of high-priced metal.

        In that years by department was winnowed subject for amount of 50 thous. rub., as well as agreement on commonwealth with Institute mashine study АН УзСССР on subject "Study component of cog-wheel", with "Ташсельмаш" - on subject "Study tree plastic on base cotton plant, rice shavings and campfires kenaf in detail machines cleaning cotton".

       In 1965-1978 s have protected their candidate's thesises A.M. Kaplanov, V.T. Kovalevskiy, A.F. Scheglov, D. Batyrmuhamedov, S. Kasymhodzhaev, F.I. Derezhnoy and others.

       To research functioning were attracted students of senior courses. The teachers took also active participation in upbringing functioning amongst students.

       Subsequently, the department doc. R.A. Gafurov, professor A.M. Kaplanov and department was named after I.Suleymanova. In 1996 department was joined to department "Bases of the designing the machines".

       In 2000 under the direction of prof. Sh.A. Shaabidova, department was is newly restored as department "Mashinovedenie and detail of the machines" named after I.Suleymanova. In 2001-2002 department held by doc. K.A. Martirosov.

      The august 26 2002 according to order of the rector TashSTU 3/901 departments "Theoretical mechanics" and "Mashinovedenie and detail of the machines" are united in department "Theoretical mechanics and detail of the machines” named after I.Suleymanova.

      In 2002-2006 s department managed by prof. Sh.A. Shaabidov, with 2006 y  -prof. K.A. Karimov. With renamings of the department on "Technology and technology of the service and detail of the machines" since october 2007 began to manage prof. A. Irgashev.

      On order of the rector TashSTU department "Detail of the machines was formed. From august 21, 2010. "The technology and technology of the service" by I.Suleymanova, managing which, was nominated by doc. M.M. Kurganbekov.  

      In february 2012 organized department "Detail of the machines". In 2013 department was held by c.t.s. K.K.Mirzayev.

On order of the rector TashSTU   01/9-05-33 from february 2, 2015 on the base of the department "Detail of the machines" and "Resistance material and mechanics" was formed department "Mechanisms and detail of the machines", managing which, was nominated by c.t.s. K.K.Mirzayev.

Since june 2016 department "Design principles of machines" was formed on order of the rector TashSTU, managing which, was nominated by c.t.s. K.K.Mirzayev.

 

        The international relationship of the department:

    - Technological institute Kumo (Korea);

    - University Gebze (Turkey);

    - Machine-building institute (Russia);

    - MSТUU (Russia);

    - Sankt-petersburg pollytechnical institute (Russia);  

    - Livovsk pollytechnical institute (Ukraine);

    - Kaunass technological institute (Lithuania);

- Rizhsk technological institute (Latvia);

    - Toliyatty technological institute (Russia);

    - Harkov pollytechnical institute (Ukraine);

    - Kazakhstan Mechanics mashines institute;

    - AS RUz, Institute Mechanical engineers and of buildings;

    - Research institute to mechanizations and electrifications of the agriculture of Uzbekistan;    

    - Tashkent textile and light industry institute;

    - Tashkent auto institute;

    - Tashkent irrigation and land reclamations institute;

    - Tashkent chemist-technological institute.

 

      The department has a relationship and joint contracts with production enterprise, research centre, institute, college and lycee.

The contingent: -

Total number

 student:

In each academic years closer 600 students (the students of the faculty Machine-building technology and Engineering geology and mountain deal) study the subjects of department "Design principles of machines".  

Directions bachelor: 

 

110 000 - Pedagogika;

310 000 - Engineering deal;

320 000 - Technology production;

610 000 - Service

Directions of the magistracy: -

Educational directions bachelor departments:

 

Department is considered leading and specialist does not released.

Professions of the magistracy of the department: -

Professorial-teaching composition of the department:

 

 

 

Doctor of technical sciences, professor Shaabidov Shorahmat Askarovich

 

 

 

 Candidate of technical sciences, docent Orifxodjayev Saidjalol Abrarovich 

 

 

 

Candidate of technical sciences, docent Martirosov Karen Anushavanovich

 

 

 

 Assistant Egamnazarov Anvar Shukurillaevich

 

 

Assistant Mamasobirov Umid Mamazokir o’g’li

 

 

 

Assistant Xolmanov Nurbek Yuldashevich

 

The scientific works of the department:

     The department leads the research work on the following 4 directions.

     1 direction.

      "Development of the equipment for technical processing seeds of plants for different integer and motivation of the leading indexes".

     The industrial copy of the equipment on given technologies is made and passed the test. Defend one tesis and received one patent (the scientific leader - d.t.s., professor Shaabidov Sh.A.).

     2 directions.

     "Study tribotechnical quality of multifunctional oils on base of goodrone vegetable oils". In given direction was defended one doctoral, one candidate's thesis. Scientific work is broadly used in production and is reached cost-performance more than 20 mln. sums. Will formed 3 monographs, more than 50 scientific articles and received 2 author's certificates. In relationship with countries: Germany, Ukraine, Chech, Slovakia, Bulgaria and Canada, data works were incarnate in life under the direction of d.t.s., prof. Shaabidov Sh.A.

      3 directions.

     "Creation and using the technological methods at estimation of capacity to work of the details of the machines on criterion wear stability and corrosion  stability" (scientific leader d.t.s., prof. Shaabidov Sh.A.)

 

 

Technical developments created on base of the scientific studies

 

 

 

 

 

 

 

 

 

 

The device on splash of high vicose material (UVD-12M, UVD-1,5M) (the authors: academician AS Ukrain V.E.Shestopalov, prof. Shaabidov Sh.A.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The device for technical and preseeding  processing of seeds el. magnetic field of high 

power (the authors: prof. Shaabidov Sh.A. doc. S.D. Isamuhamedov, k.t.s. U.S. Isamuhamedov)

Scholastic-methodical work department.

       They are prepared and typed professorial-teaching members of the department " Design principles of machines" textbooks, scholastic allowances, synopsises lecture, scholastic-methodical allowances on experienced and practical work, allowances for performing computing-graphic work, manual of the execution course and degree work, tests and questionnaires for performing current, intermediate and final tests.

       In process of the education new information and ped. technologies, ECM are used. Broadly teacher are introduced in scholastic process the most latest pedagogical developments such as, "Brain attack", "Network" (klaster).

       The improvement technical suply departments, use the scientific achievements in practical occupation and lecture is a vital by problem.  The gifted students take part in scientific work, emerge with report on scientific conference, and results have something published in scientific journal of the Republic.

       At the following years prof-teaching composition of the department was created several monographs, ensemble textbook and allowance, methodical allowance for performing the practical laboratory work, is typed more than 50 scientific articles. The big amount of this material was placed  "Ziyonet" in electronic version.

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   According to requirements the most latest advanced state standard, department has prepared the scholastic program and variants for test checking work on subject "Detail of the machines".

      The professor of the department Shaabidov Sh.A. is an academician to international academy of the sciences of Ecologiy and safety of the person, as well as prof. Shaabidov Sh.A. and doc. K.A.Martirosov, are "Honourable professor" of Technical university of Toliyatti of Russian Federation.     

Address of the department:

Tashkent, Almazar region, str. University 2.

Phone: tel: 560; . (8371)246-08-10

Electronic address: e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Monographs:

1. Шаабидов Ш.А., Мартиросов К.А. и др. Управление технологической наследственностью при изготовлении нежестких валов. Монография. - Ташкент. 2010 г.

2. Шаабидов Ш.А., Иргашев А., Мирзаев К.К. Повышение эксплуатацион­ных свойств поверхностных слоев деталей машин. Монография. - Ташкент. 2012 г.

3. Мартиросов К.А. и др. Совершенствование приводов машин для специфических условий эксплуатации. Монография. – Краснодар. 2012 г.

4. Мартиросов К.А. и др. Статическая нагруженность составных зубчатых муфт и колес с упругим элементом. ООО “Издательский Дом-Юг”. 2013 г.

5. Мартиросов К.А. и др. Основы научных исследований в технике. ООО “Издательский Дом-Юг”. 2014 г.

6. Иргашев А., Мирзаев Қ.Қ., Иргашев Б.А. Повышение износостойкости зубчатых передач. Ташкент, ТашГТУ. 2015 г.

Textbooks:  

1. Шообидов Ш. А., Мусаев С. У. Юритмалар. Тасмали ва занжирли узатмаларни лойиҳалаш. –Тошкент: 2000. -82 б.

2. Шообидов Ш.А. Машина деталлари. Ўқув қўлланма. –Тошкент: 2004. -120 б.

3. Шообидов Ш. А., Мусаев С. У. Тишли ва червякли узатмаларни лойиҳалаш. –Тошкент: 2005. -80 б.

4. Shoobidov Sh. A., Musayev S.O’. Ko’tarish, transport mashinalari. –T.: «SHARQ», 2007. -192 b.

5. Shoobidov Sh.A. Mashina dеtallari: Tеxnika oliy o‘quv yurtlari uchun darslik. - Toshkеnt: “O’zbekiston ensik­lopediyasi”, 2014. - 444 b.

6. Kurganbekov M.M., Moydinov A. Mashina dеtallari: O’quv qo’llanma. I va II qismlar. Toshkеnt: “O’zbekiston ensik­lopediyasi”, 2014. - 384 b.

Scholastic allowances:

1. Shoobidov Sh.A., Kurganbekov M.M., Mirzayev Q.Q. va boshq. Mashina detallari­ning birikmalari. Uslubiy qo’llanma. Toshkent davlat texnika universiteti, 2011 y.

2.  Kurganbekov M.M., Musayev S.O‘., Mirzayev Q.Q. «Mashina detallari» kursi bo‘yicha laboratoriya ishlari. O‘quv-uslubiy qo‘llanma. /Toshkent Davlat texnika universiteti. Toshkent, 2011 y.

3. Shoobidov Sh. A., Kurganbekov M.M., Mirzayev Q.Q. va boshq. Friksion, tasmali va tishli uzatmalar.  Uslubiy qo’llanma. Toshkent davlat texnika universiteti. 2011 y.

4. Kurganbekov M.M., Moydinov A., Mirzayev Q.Q. Chervyakli, zanjirli uzatmalar, vallar va o’qlar. Uslubiy qo’llanma. Toshkent davlat texnika universiteti. 2012 y.

5. Kurganbekov M.M. Podshipniklar va muftalar. Uslubiy qo’llanma. Toshkent davlat texnika universiteti. 2012 y.

6. Курганбеков М.М., Мойдинов А., Мирзаев Қ.Қ. Лабораторные работы по курсу «Детали машин». Методические указания. Тошкент давлат техника университети. 2012 й.

7. Moydinov A. Silindrsimon tishli uzatmalarni mustahkamlikka hisoblash. «Mashina detallari» fanidan o‘quv-uslubiy qo‘llanma. – Toshkent: ToshDTU, 2012. 72-b.

8. Orifxo’jayev S.A. Mashina detallari fanidan kurs loyihasini rasmiylashtirish. Uslubiy ko’rsatmalar. /ToshDTU. Toshkent, 2013 y. -21 bet.

9. Orifxo’jayev S.A. Mashina detallari fanidan laboratoriya mashg’ulotlari uchun uslubiy ko’rsatmalar (aviatsiya fakulteti talabalari uchun). /ToshDTU. Toshkent, 2013 y. -32 bet.

10. Kurganbekov M.M., Mirzayev Q.Q. «Mashina detallari» fanidan glossariy. Uslubiy ko’rsatma. /ToshDTU. Toshkent, 2014 y. -68 bet.

11. Kurganbekov M.M., Mirzayev Q.Q. «Mashina detallari» fanidan kurs loyihasini bajarishda “Mexanik yuritmalarning kinematic hisobi”. Uslubiy ko’rsatma. /ToshDTU. Toshkent, 2014 y. -82 bet.

12. Мартиросов К.А. и др. Проектирование валов и опор качения. Учебное пособие. – Краснодар: Издателський Дом-Юг, 2015. – 72 с.

Synopsis lecture:

On the part of prof-teaching composition of the department are made synopsis to lectures on subject "Detail of the machines". The electronic version synopsis to lectures was placed in put "Ziyonet".

Short information about scholastic and laboratory cabinet:

The department has 2 scholastic laboratories and 1 cabinet for scientific studies. Equipped the laboratory in working order. The tax inquiry for new equipment.

 

 

 

 

 

 

 

 

 

Contact us

2, Universty street, Tashkent, 100095, Uzbekistan

 Phone: +998712464600

Fax: +998712271032

E-mail: tstu_info@tdtu.uz

JoomShaper