Electronics and instrument making








“Engineering-physics” faculty, “Instrument making” chair




Do .ctor of Science in Physics and mathematics Tashmuhamedova Dilnoza

Artikbayevna 1975  Kafedra mudiri



This email address is being protected from spambots. You need JavaScript enabled to view it.  

In 1995, in connection with the importance and necessity in the Republic of designing new computers, their proper operation and training in this regard, the department was redesigned and named "Design of electronic computing facilities and technologies".

In the new historical conditions, many enterprises in the republic were left without perspective scientific planning, new domestic equipment. It was replaced by the purchase of foreign technologies, devices and systems. The Government of the Republic of Uzbekistan has taken a course on innovative development, modernization of the economy, put forward a number of promising national projects. To turn these projects into reality, it is necessary to recreate the high-tech base of instrumentation. Almost all national projects can be implemented only if there are modern microelectronic and other similar facilities in the country. In this regard, the department gradually changed its priorities in the teaching and training of specialists and in 2004 received a new name "Instrument making".

In July 2016, the head of the department is Doctor of Physical and Mathematical Sciences, Professor Tashmuhamedova Dilnoza Artikbaevna.

The department on the basis of the drafted cooperation agreements has links with industrial enterprises, research institutes of the Academy of Sciences, colleges and academic lyceums of the Republic.

To date, there are two directions in the department "Instrument-Making" on the basis of bachelorship:

5310800 - "Electronics and Instrument Making (Instrument Making)";

5320300 - "Technological machines and equipment (in the medical industry)"

And two specialties of the magistracy:

5A310802 - Instruments and methods of measuring systems and control (by industry -medical devices)

5A320313 - Medical and biotechnological machinery and equipment

For admission to the bachelor's degree in the department "Instrument-Making" you need to pass examinations in the following subjects:

2. Mathematics
3. Foreign language

Total number of students

Present time at the chair of "Instrumentation" in direction of bachelor's degree 203 students, and at the master degree 11 students are trained.

Direction of the bachelor degree:

5310800 – Electronics and instrumentations (instrument-making)
5320300 – Technological machines and equipment (in the medical industry )

Direction of the master degree:

А320313 – Medical and Biotechnical Machines and Equipment
5А310802 – Instruments and methods of measuring systems and control (medical equipment)

Dilnoza Artikbayevna Tashmuhamedova
Doctor of science in physics and mathematics, cheaf of Chair

 Chair’s professors and teachers:




Mahmud Arifovich Tursunov

Doctor of science in physics and mathematics, professor of the Chair





  Xasanovich Xaydarov

Senior lecturer of the Chair





Boburjon Bohodirjonovich Gaibnazarov

Senior lecturer of the Chair





Rog’ib Kashipovich Qodirov                                                      

 Senior teacher of the Chair





Orzigul Eshonovna Kimizbaeva
Senior teacher of the Chair





 Zulfiya Abdufattahovna Alimova Senior teacher of the Char







G’iyosiddin Maxmadiev

Senior teacher of the Chair






Yoqub Suvonovich Ergashov

Senior teacher of the Chair







Abdihalikov Seyt PrmatovichAssistant of the Chair








Azimjon Narzullayevich O’roqov        

Assistant of the Chair







Mahmudov Miraziz Mirabboa o'g'li Assistant of the Chair






Feruz Yoqubjonovich Xudoyqulov  Assistant of the Chair






Adolat Anvarovna Shukurova  Assistant of the Chair






Chair’s scientific works


At the Chair of "Instrumentation" there is an opportunity, on the one hand, to design and manufacture modern electronic equipment based on computer technology on the other hand conducting research and training gifted specialists in the creation of modern instruments of medical equipment and technology.
Graduates of academic lyceums and colleges in the direction of exact subjects, physics, engineering and medicine can enter the bachelor's degree in the instrument engineering department.
Graduated students of the instrument engineering Chair can work for the outstanding enterprises and organizations of the republic. For example, Artel, the Scientific Center of the Republican emergency ambulance, the republican center of endocrinology, the military hospital, medical equipment, etc.
Based on the results of scientific research, articles and theses have been prepared and printed. In scientific research, the participation of undergraduate and undergraduate students is ensured.
Scientific research is reflected in master's theses.
In the activities of the Republic "Instrumentation" and "Biomedical Engineering" new directions in these areas the Chair is considered advanced. In this field, specialists and personnel are not enough. Therefore, knowing that the training of human resources is entrusted to the department, it is more creative to train young specialists.
To increase the qualitative level of ongoing scientific research in the direction of the national economy, to train personnel who meet the world demand and to ensure the continuation of the relay of the science generation at the Chair of Instrumentation, there is a scientific-practical laboratory "Material Science and Technology of New Materials."
Entrepreneurial affairs at the department are provided on the basis of directions of the department, because this direction is considered actual in the Republic.
For this reason, the drafting of economic contracts with the Ministry of Health is difficult. However, despite this, it should be noted that the faculty of the department has prepared several works together with gifted students on the system of "teacher-student".
In 2013-2016, the Chair conducted the work under the grant TEMPUS QUEECA "Quality of engineering education in Central Asia" for the amount of 67,159.69 euros.
Patents received by members of the Chair:
Vasilyeva SA, Gaibnazarov BB, Khaydarova GS, Magrupova MT, Holmirzaev SB, Valetov "Program for the correction of speech disorders in children" patent number No. DGU 03094 of February 19, 2015 .
Khaydarov AH, Masharipov Sh.M., Abdurahmonov AA, Gaibnazarov BB, Kodirov RK, Rashidov AA, Abdukhalikov SP, Khudoikulov F.Y., Aliev A. A. "Measuring instrument for determining the capacity of the capacitor and the coil inductance" patent number No. DGU 04298 dated 3 February 2017
Khaydarov AH, Masharipov Sh.M., Gaibnazarov BB, Rashidov AA, Abdukhalikov SP, Fayzullaev US, Razhabov AG "Temperature and humidity sensor with liquid crystal display" patent number No. DGU 04284 dated 3 February 2017
Khaydarov A.Kh., Gaibnazarov BB, Abdukhalikov SP, A.N.O'roqov, Aliev AA, Razhabov A.G. "Measurement of the arterial pulse with the help of photoplethysmographic infrared conversion" patent number No. DGU 04295 from 3 February 2017

Innovations in the Chair

On the subject "Instrument-making" by the professors and teachers of the Chair are prepared and printed: textbooks, teaching aids, lecture materials, teaching and methodological instructions, instructions for the fulfillment of calculation and graphic works, instructions for the performance of coursework and qualifying graduation works, TC, PC and Stages to conducting questionnaires and test tasks of the IR.
New information and pedagogical technologies are introduced into the educational process, computers are used. On the part of professors and teachers, the factors of modern pedagogy are being introduced into the educational process by "brainstorming", the "network" method (cluster).
Important tasks are the application in laboratory work and lectures, improvement of the material and technical bases of the department, scientific achievements. Gifted students are involved in scientific work, they participate in lectures in scientific conferences of students, the results obtained are published in scientific journals of the Republic.
In the following years, several monographs, textbooks and teaching aids, methodical instructions for practical laboratory works and more than 50 pieces were printed from professors and teachers. Scientific articles. Introduced in the site "Ziyonet" a lot of sources, textbooks, electronic versions of teaching aids.

On the subject "Instrument-making" the Chair prepared exemplary educational programs and compiled variants of control tests for the requirements of an advanced state standard of education.

Life of the Chair

.Conversation with graduates

Visiting in a hostel

Visit to the sumalak in the hostel

Studying the condition of residence of students living in a hostel

Students of the Chair on joint work (charity)

Trip to Samarkand

Address of Chair:


Conversation with graduates

Visiting in a hostel

Visit to the sumalak in the hostel

Studying the condition of residence of students living in a hostel

Students of the Chair on joint work (charity)

Trip to Samarkand

Visiting students of cultural centers
Toshkent sh. Olmazor tumani, Universitet ko’chasi, 2 uy.
(8371) 227-19-26;

This email address is being protected from spambots. You need JavaScript enabled to view it.  


Ташмухамедова Д.А., Умирзаков Б.Е, Донаев С.Б. Наноразмерные структуры в ионно-имплантированных пленках Si и GaAs LAP-2016. Германия. 201 с, 2016 г.
Teachers of the Chair Xaydarov A.H., Gaibnazarov B. B. prepared a training manual "Organization of training in the maintenance of medical equipment" approved by MHSERU 82-order, from 13 March 2013 received Grief. Gaibnazarov B.B. Prepared a training manual "Maintenance, installation and repair of medical equipment with a microprocessor computer" approved by the 82nd order of MHSERU, on March 13, 2013, Grief was received.

O’quv va uslubiy qo’llanmalar:

Gaibnazarov BV Reliability of electronic devices and sensors. Manuals. Tashkent State Technical University, 2012.
2. Gibnazarov B. B. Medical diagnostic equipment and software. Manuals. Tashkent State Technical University, 2012.
3. Gaitnazarov B. B. The curriculum guide. Manuals. Tashkent State Technical University, 2012.
4. Gaibnazarov methods of testing VV and tools. Manuals. Tashkent State Technical University, 2012.
5. Gibnazarov B. and B. The device tizimlarniloyixalash. Training aids. Tashkent State Technical University, 2013.
6. Gaibnazarov jak style. Training aids. Tashkent State Technical University, 2014.

  1. Khaidarov A.N. analog and digital electronics. Manuals. Tashkent State Technical University, 2012.
  2. Khaidarov A. Kh., The basis of measuring equipment. Training aids. Tashkent State Technical University, 2013.
  3. Khaidarov AN Construction and design of systems. Manuals. Tashkent State Technical University, 2013.
  4.  Khaidarov A. N. Electronic device for control and diagnostics. Training aids. Tashkent State Technical University, 2014.
  5.  Tursunov MA Biotechnical medical devices and systems. Tutorial. Tashkent State Technical University, 2013.
  6.  Tursunov MA Medical diagnostic devices and programs. Tutorial. Tashkent State Technical University, 2013.
  7.  Vasilyeva S.A. Processing of medical and biological information. Teaching and methodological manual for undergraduates in specialty 5A523901 "Medical and biological apparatuses, systems and complexes", printing house TashGTU, 2013.
  8.  Methodical instructions to the performance of laboratory works "Medical diagnostic programs and systems" for students of the direction "Instrument-Making" printing house TashGTU, 2013.
  9. Kompyuter tizimlari va vositalari : darslik / T. M. Magrupov, S. S. Rasulova, M. X. Aripova ; O'zR OO'MTV; TDTU. - Toshkent : TDTU, 2012. - 192 b.  Экземпляры: всего:2 - Дар(2)             
  10. Компьютерные средства и системы : учеб. пособ. [для магистр. по спец. М522003, В5521900, В5521900, аспир. и науч. работ.] / С. С. Расулова, Т. М. Магрупов, М. Х. Арипова; Мин-во высш. и сред. спец. образов. РУз; ТГТУ. - Тошкент, 2004. - 167 с. 50 экз.
  11. Elektromeditsina texnikalarini o'rnatish, texnik xizmat ko'rsatish va tuzatish : Tibbiyot koll. uchun o'quv qo'll. / I.I. Muqimdjanov, A.R. Xudayberganov, T. Usmonov ; O'zR OO'MTV; O'rta maxsus kasb-hunar ta'limi markazi. - Toshkent : Abu Ali ibn Sino nom. tibbiyot nashr., 2004. - 184 b.            
  12. Расулова С.С., Рашидов А.А. Микропроцессорлар ва микропроцессор тизимлар. Ўқув қўлланма. Тошкент: ТошДТУ, 2001, -120 б.
  13. Современные микропроцессоры и их применение в медицинских компьютерных системах : учеб. пособ. / Т. М. Магрупов, С. С. Расулова, А. А. Каххаров ; Мин-во Высш. и сред. спец. образования РУз ; ТГТУ. - Тошкент, 2006. - 114 с.  Экземпляры: всего:25 - ХР(6), ФРЭА(19)
  14. Медицинские диагностические приборы и системы : учеб. пособ. для бакал. по направ. 5521500-"Приборостроение" и 5523900 "Биомедицинская инженерия" / Т. М. Магрупов, М. А. Турсунов, С. А. Убайдуллаев;Мин-во высш. и сред. спец. образования РУз; ТГТУ. - Ташкент : ТГТУ, 2010. - 232 с.
     Экземпляры: всего:1 - Дар(1)
  15. Расулова С.С., Рашидов А.А. Методы тестирования цифровых устройств. Методические указания к лабораторным работам. Ташкент: ТГТУ, 2003, -30 с.
  16. 22. Yo'nalishga kirish : о'quv qoll. : ("Biotibbiyot muhandisligi" yo'nal.) / T. M. Magrupov, M. A. Тursunov, G. B. Sadikova ; O'zR OO'MTV; TDTU. - Toshkent : TDTU, 2010. - 99 b. Экземпляры: всего:1 - Дар(1)
    23. Yo'nalishga kirish: (Asbobsozlik) : o'quv qo'll. / T. M. Magrupov ; O'zR OO'MTV; TDTU ; O'zR OO'MTV, TDTU. - Toshkent : TDTU, 2006. - 72 b. Экземпляры: всего:24 - ХР(5), ФРЭА(19)
    24. Tibbiyot diagnostika qilish dasturi va tizimlari : о`quv qo`ll. : ["Asbobsozlik" yo`nal. bo`yicha bakal. va magistr. uchun] / T. M. Magrupov, S. A. Vasileva, B. B. G`oibnazarov ; O`zR OO`MTV ; TDTU. - Toshkent : TDTU, 2008. - 88 b. : rasm, jadval. - Bibliogr.: b. 88 Экземпляры: всего:1 - Дар(1)

    Brief information about educational and scientific laboratories:

    At the Chair there are 4 laboratory and 1 research room. Laboratory equipment in working order. Ordered new laboratory equipment.
    The laboratory has the following equipment:
    3 pcs. Pentium-4 - Creating software for biomedical research
    4 things. Oscilloscopes С1-73 - carrying out of microelectronic researches and creation of models of devices
    1 PC. Installation ELUS-2M - use in the design of installations



Contact us

2, Universty street, Tashkent, 100095, Uzbekistan

 Phone: +998712464600

Fax: +998712271032

E-mail: tstu_info@tdtu.uz